Parallel Graphic LCD Display Module

Product Detail

Parallel graphic LCD display module
Parallel graphic LCD display module ADM12864H   

Brand name	Amotec
Dots	128*64
Dimension	75*52.7
controller	S6B0108
Power supply	5V




Description of Parallel graphic LCD display module ADM12864H      

• Parallel graphic LCD display module 128 dots wide & 64 dots high display is an industry standard that can display images or any size letter or number necessary

• Parallel graphic LCD display module with FSTN mode has the sharpest contrast & highest quality image on the market

• Parallel graphic LCD display module operates in sub zero temperatures up to high temperatures without the need of a heater & with no loss of sharpness




Features

• 128x64 dots graphic LCD module

• Low power consumption

• Built-in controller (S6B0108)

• +5V power supply

• 1/64 duty cycle

• Easy interface with 8-bit MPU

• LED backlight optional

• Negative voltage optional




Mechanical Specifications






Temperature Characteristics

Parameter	Symbol	Rating	Unit
Operating temperature	Top	0 ~ +50	?
Storage temperature	Tst	-10 ~ +60	?

*Wide temperature range is available
(operating/storage temperature as –20~+70/-30~+80?)


Interface Pin Connections

Pin No.	Symbol	I/O Type	Description
1	VDD	Supply	Power supply
2	VSS	Supply	Ground
3	V0	Supply	LCD driver supply voltage
4~11	DB0~ DB7	I/O	Data bus [0~7] Bi-directional data bus
12	CS2	I	Chip selection When CS1=L,CS2=H, select IC1 When CS1=H,CS2=L, select IC2
13	CS1
14	RES	I	Reset signal. When RES=L ?1?ON/OFF register becomes set by 0.(display off) ?2?display start line register becomes set by 0 (Z-address 0 set, display from line 0) ?3?After releasing reset , this condition can be changed only by instruction.
15	R/W		Read or Write RW    Description H      Data appears at DB[7:0] and can be read by the CPU while E= H CS1B=L,CS2B=L and CS3=H. L      Display data DB[7:0] can be written at falling edge of E when CS1B=L, CS2B=L and CS3=H.
16	D/I		Data input/output pin of internal shift register MS     SHL     DIO1     DIO2  H       H       Output    Output  H       L        Output    Output  L       H         Input      Output   L       L         Output     Input
17	E		Enable signal E     Description H      Read data in DB[7:0] appears while E=“High”. L      Display data DB[7:0] is latched at falling edge of E.
18	VEE	Power	VEE is connected by the same voltage.
19	A(LED+)		Power for backlight (Anode)
20	K(LED-)		Power for backlight (Cathode)






FAQ:

1.What is FSTN LCD ?

Answer :FSTN (Film-compensated Super-twisted Nematic) provides a sharper contrast than STN by adding a film. The cost is approximately 5% higher than STN. FSTN works great for indoor and outdoor applications and is mainly used in graphic displays and higher end products. 

2.What is the temperature range ?

This display has a wide temperature range: -20° Celcius to +70° Celcius which equates to (-4° Fahrenheit to +158° Fahrenheit).
3.What are the applications of your products?
Answer: We provide one-stop solution for a wide range of applications in the fascinating digital world. The products are widely used in the fields of automotive, telecommunications, medical equipments, home appliances, industrial and consumer applications.
4.Can you design the LCD in accordance with our demand ?
Answer: Sure. We will offer you the best tooling charge and technical support .