LCD Graphic Smart Display

Product Detail

LCD Graphic Smart Display 

LCD Graphic Smart Display 128x64, Display LCD 128x64

Model No. ADM12864B
 ?Graphic LCD 128x64, Display LCD 128x64
 ?Monochrome Graphic LCD
 ?Built-in controller  KS0108B
 ?+5V power supply
 ?1/64 duty cycle
Descrpition of LCD Graphic Smart Display ADM12864B
LCD Graphic Smart Display ADM12864B can be used on electrical home appliances, consumer electronics including white goods, POS system, home applications and industrial instrument ect.We have a full range of LCD Graphic Smart Displays whose resolutions ranging from 100 x 32 to 320 x 240.




Features

• Display format: 128*64 dots matrix graphic
• Easy interface with 8-bit MPU
• Low power consumption
• LED back-light
• Driving method : 1/64 duty , 1/6.7 bias
• LCD driver IC: KS0108B(2PCS)?KS0107B
• Connector: Zebra




Mechanical Specifications

Item	Dimension	Unit
Module Size(W*H*T)	78.0*70.0*10.0	mm
Viewing Area(W*H)	62.0*44.0	mm
Number of Dots	128.0*64.0	PCS
Dot Size(W*H)	0.40*0.56	mm
Dot Pitch(W*H)	0.44*0.60	mm
Module Size With B/L	78.0*70.0*15.0	mm




Temperature Characteristics

Parameter	Symbol	Rating	Unit
Operating temperature	Topr	0 ~ +50	?
Storage temperature	Tstg	-20 ~ +70	?


Figure 1. External Dimensions
 

*NOTE: 1.All units are mm.
2.Tolerances unless otherwise specified ±0.2.




Interface Pin Connections

Pin No.	Symbol	I/O Type	Description
1 2	/CSA /CSB	I	Chip selection When CS1=L,CS2=H, select IC1 When CS1=H,CS2=L, select IC2
3	VSS	Supply	Ground
4	VDD	Supply	Power supply
5	V0	Supply	LCD driver supply voltage
6	D/I		Data input/output pin of internal shift register MS     SHL     DIO1     DIO2 H       H       Output    Output H       L       Output    Output L       H       Input      Output L       L       Output     Input
7	R/W		Read or Write RW    Description H      Data appears at DB[7:0] and can be read by the CPU while E= H CS1B=L,CS2B=L and CS3=H. L      Display data DB[7:0] can be written at falling edge of E when CS1B=L, CS2B=L and CS3=H.
8	E		Enable signal E      Description H      Read data in DB[7:0] appears while E= “High”. L      Display data DB[7:0] is latched at falling edge of E.
9	DB0	I/O	Data bus [0~7] Bi-directional data bus
10	DB1
11	DB2
12	DB3
13	DB4
14	DB5
15	DB6
16	DB7
17	/RST	I	Reset signal. When RSTB=L ?1?ON/OFF register becomes set by 0.(display off)  ?2?display start line register becomes set by 0 (Z-address 0 set, display from line 0) ?3?After releasing reset , this condition can be changed only by instruction.
18	VEE	Power	VEE is connected by the same voltage.
19	A		Back-light anode
20	K		Back-light cathode




Electrical Absolute Maximum Ratings (KS0107B)

Parameter	Symbol	Rating	Unit	Note
Operating voltage	VDD	-0.3 ~ +7.0	V	*1
Supply voltage	VEE	VDD-19.0 ~ VDD+0.3	V	*4
Driver supply voltage	VB	-0.3 ~ VDD+0.3	V	*1,2
	VLCD	VEE-0.3 ~ VDD+0.3	V	*3,4




*Notes:

• Based on VSS = 0V

• Applies to input terminals and I/O terminals at high impedance. (Except V0L, V1L, V4L, and V5L)

• Applies to V0L, V1L, V4L, and V5L.

• Voltage level: VDD=V0=V1=V2=V3=V4=V5=VEE





FAQ
1.What is the lead time for MP ?
Answer: Normally it takes 4 weeks.

2.Where is your factoru located ?

Answer: Our factory is located in Xiamen ,which is a beautiful coastal city.

3.What is your company phone number ?

It’s 0086-592-5716899 or cell phone 0086-18950056029.
4.How can I get the price and consult for product details?
Answer:Please send us inquiry through email orphilia@amotec-display.com or Lee@amotec-display.com.